AERO TANK CAPS

Aero 200


Aero 200
Der Aero Cap 200 findet Verwendung auch bei minimalsten Platzverhältnissen. Er besteht aus einer Ganzmetall-Konstruktion und kann deshalb für nahezu alle aggressiven Flüssigkeiten verwendet werden.
Application
The Aero 200 filler cap will fit on the smallest tank. Truly versatile, it has an all metal construction which allows it to be used with many hostile fluids. It can be specified for every conceivable application.
Installation
A flat and smooth surface should be chosen to successfully install the Aero Filler Cap. Where the filler cap is not in contact with fuel, for example when fitted to the outside skin of a vehicle, it is possible to accommodate a slightly curved surface but care must be taken not to distort the flange by over tightening the fixing screws.
With ‘wet’ installations such as motorcycle and boat tanks, the use of a gasket and sealant is recommended. We recommend ‘Hylomar’ sealant or a suitable equivalent.
Specification
The Aero 200 filler cap is available in no-lock version only.The flange & flange neck types are supplied with a gasket and a screw nut washer pack.

Technische Daten:

Außendurchmesser:

80mm

Lochkreis-Durchmesser:

65,5mm

Befestigungsbohrungen:

6 x 4mm

Gewicht:

174g

Lieferbar ausschließlich als nicht abschließbare Ausführung.

Flange Type

Extended Neck

Flange/Neck Types

Short Neck

Application

Materials

Fuel, oil & water tanks

Centre Forging - Aluminium Alloy 6063

Features

Flange - 6082 T6

Fixing Holes: 6 x 4 mm CSK

Neck - 6082 T6

Bolt Circle: 63,5 mm 2.5 inches

Centre Pin - 316 Stainless Steel

Finish

* D: Aluminium / P: Steel

Centre Anodised: Clear (Silver) / black, red, blue, purple, green & gold

Weight

Flange & Flange/Neck anodised: Clear (Silver)

A26S: 106g

A2NXD: 115g

Necks are not anodised

A2ND: 70g

A26NS: 137g

All dimensions are in millimetres

Flange/Neck: The Aero 200 range includes flange / neck versions. The connecting neck is integral with the flange so as to allow remote connection for the filler.

Necks: The Aero 200 range includes necks. These can be supplied in steel (P) or aluminium (D) and are suitable for welding to a tank, or for fixing directly into a hose.

Special options: Flange/necks configured for 1.5 inch hose and also versions with threaded necks (JIC 12 & JIC 16) suitable for connection with female hose ends.

WEITERE AERO CAP MODELLE