AERO TANK CAPS

Aero 300


Der Aero Cap 300 wurde für Fahrzeuge entwickelt, wo die Verwendung des Aero 400 aus Platzgründen oder wegen der gerundeten Form des Tanks nicht möglich ist.

Application

The Aero 300 was introduced to meet a demand for a filler cap with a smaller footprint. It is smaller then the Aero 400 and helps the help installation especially when limiting factors such as wing or tank curvature are taken into account.

Installation

A flat and smooth surface should be chosen to successfully install the Aero Filler Cap. Where the filler cap is not in contact with fuel, for example when fitted to the outside skin of a vehicle, it is possible to accommodate a slightly curved surface but care must be taken not to distort the flange by over tightening the fixing screws.

With ‘wet’ installations such as motorcycle and boat tanks, the use of a gasket and sealant is recommended. We recommend ‘Hylomar’ sealant or a suitable equivalent.

Specification

The Aero 300 filler cap is available in locking and no-locking options. Locking types are supplied with two matching keys. Extra keys are available as spares.

The flange & flange neck types are supplied with a gasket and a screw nut washer pack.


Technische Daten:

Außendurchmesser:

95,25mm

Lochkreis-Durchmesser:

76,2mm

Befestigungsbohrungen:

6 x 5mm

Gewicht:

176g

Lieferbar als abschließbare oder nicht abschließbare Ausführung.

Short Neck

Flange/Neck Types

Lead Free Necks

Applications

Materials

Fuel, oil & water tanks

Centre Forging - Aluminium Alloy 6063

Features

Flange - 6082 T6

Fixing Holes: 6 x 5mm csk

Neck - 6082 T6

Bolt Circle: 76.2mm 3.00 inches

* D: Aluminium / P: Steel

Weight

Finish

A36S: 62.5g

A36NS1B: 102g

A36NS3: 174g

Anodised Clear (Silver) - Option black

A3NXD: 64.5g

A36NS1: 136g

A36NLF: 32.5g

* N Versions are not anodised

A3ND: 28.5g

A36NS2: 128g

All dimensions are in millimetres

Flange/Neck: In the Aero 300 range flange/neck versions are available. The connecting neck is integral with the flange so as to allow remote connection for the filler.

A36NS1

Necks: The Aero 300 range includes necks without flange. These can be supplied in steel (P) or aluminium (D) and are suitable for welding to a tank, or for fixing directly into a hose.

A3NXD

All Aero 300 range is available in locking (L) and no-locking (S) options.

WEITERE AERO CAP MODELLE